KAN-therm: Pipes

Main image.
Contractors area Designers area Distributors area


Plastic pipes laid and fixed to Styrofoam sheets are the heating element of the System KAN-therm. The KAN-therm System for floor and wall heating offers a very wide assortment of pipes both in terms of diameters and types. This allows selecting a best technical and cost-effective solution to satisfy all customers’ requirements. For construction of a KAN-therm floor heating two kinds of plastic pipes can be used: PE-Xc and PE-RT with an antidiffusion barrier or multi-layer PE-RT/Al/PE-RT pipes with an aluminum insert.

Depending on the required heat capacity of a floor heating system we use pipes of a diameter between Ø12 and 26 mm. For wall heating system we use Ø8 – 16 mm pipes covered with a special plaster or in finished panels mounted on the wall. Pipes are available in coils 100-600 m depending on the pipe diameter. The use of pipe decoiler Uncoiling pipes from coils 600 m allows you to form heating coils fast and easy without turning them around their axis.


Turning pipes around their axis causes tensions and a tendency of a pipe to separate from a substrate therefore forces to make it fast to the substrate must be greater.