KAN-therm: Cabinets



Cabinets

Surface heating and cooling manifolds should be mounted in special installation cabinets which are available in three basic versions: surface-mounted, flush-mounted and covered with glaze.

The design of installation cabinets for surface heating and cooling enables the assembly of manifolds with and without a mixing system. The cabinets also provide space for the electrical strips. Electrical strips are fitted with screws to a specially prepared holes on the mounting rail at the top of the cabinet.<br> Fast selection of cabinets, depending on the type of manifold, basic equipment and how connection method is presented in the table below:

Type of cabinet Code Height
[mm]
Width
[mm]
Depth
[mm]
Number of circuits
OP manifold manifold
OP+Set-P/Set
-K
OP manifold
with mixing
system
SWN-OP-10/3 1100-OP 710 580 140 2-10 2-7/2-6 2-3
SWN-OP-11/7 1110-OP 710 780 140 11-13 8-11/7-10 4-7
SWN-OP-15/10 1120-OP 710 930 140 14-15 12-14/11-13 8-10
SWPG-OP-10/3 1300G-OP 710 580 110-165 2-10 2-7/2-6 2-3
SWPG-OP-11/7 1310G-OP 710 780 110-165 11-13 8-11/7-10 4-7
SWPG-OP-15/10 1320G-OP 710 930 110-165 14-15 12-14/11-13 8-10
SWP-OP-10/3 1300-OP 750-850 580 110-165 2-10 2-7/2-6 2-3
SWP-OP-11/7 1310-OP 750-850 780 110-165 11-13 8-11/7-10 4-7
SWP-OP-15/10 1320-OP 750-850 930 110-165 14-15 12-14/11-13 8-10