KAN-therm: Pipes



Pipes

Pipes (thin-walled, seamed tubes) and pipe connectors are made of a chromium-nickel-molybdenum X5CrNiMo 17 12 2 No. 1.4401 according to DIN EN 10088, AISI 316; alloy steel chromium-nickel-molybdenum No. 1.4404, AISI 316L stainless steel and alloy chromium-molybdenum-titanium X2CrMoPi18-2 No. 1.4521 according to DIN EN 10088, AISI 444.
The molybdenum contents (at least 2.2%) ensure high resistance to corrosion. According to the EU Directive 98 the nickel contents in an alloy does not cause excessive contents of this metal in drink water (0.02 mg/l).

Dimensions, specific weights, water volumes of KAN-therm Inox pipes:

KAN-therm Inox (pipes 1.4404)

DN

Outside dia. x wall thickness Wall thickness Internal diameter  Specific weight  Length  Water volume
  mm x mm mm mm kg/m m l/m
10 12 × 1,0  1,0 10,0 0,270 6 0,080
12 15 × 1,0  1,0  13,0  0,352 6 0,133
15 18 × 1,0    1,0  16,0 0,427 6 0,201 
20 22 × 1,2  1,2  19,6 0,627  6 0,302
25 28 × 1,2   1,2 25,6 0,808   6 0,514
32 35 × 1,5   1,5 32,0  1,263 6 0,804 
40 42 × 1,5 1,5 39,0  1,527   6 1,194
50 54 × 1,5 1,5  51,0 1,979 6 2,042
65 76,1 × 2,0 2,0 72,1 3,725 6 4,080
80 88,9 × 2,0 2,0 84,9 4,368 6 5,660
100 108 × 2,0 2,0 104,0 5,328 6 8,490
125 139,7 × 2,0 2,0 135,7 7,920 6 14,208
150 168,3 × 2,0 2,0 164,3 9,541 6 20,893

 

KAN-therm Inox pipes (pipes 1.4401 and 1.4521)
DN Outside dia. x wall thickness Wall thickness Internal diameter Specific weight Length Water volume
  mm x mm mm mm kg/m m l/m
10 12 × 1,0  1,0 10,0 0,270 6 0,080
12 15 × 1,0  1,0  13,0  0,352 6 0,133
15 18 × 1,0    1,0  16,0 0,427 6 0,201 
20 22 × 1,2  1,2  19,6 0,627  6 0,302
25 28 × 1,2   1,2 25,6 0,808   6 0,514
32 35 × 1,5   1,5 32,0  1,263 6 0,804 
40 42 × 1,5 1,5 39,0  1,527   6 1,194
50 54 × 1,5 1,5  51,0 1,979 6 2,042
65 76,1 × 2,0 2,0 72,1 3,725 6 4,080
80 88,9 × 2,0 2,0 84,9 4,368 6 5,660
100 108 × 2,0 2,0 104,0 5,328 6 8,490