∅ 16-63 mm
System KAN‑therm ultraPRESS is a state-of-the-art, complete installation system consisting of polyethylene pipes with aluminium layer, as well as PPSU or brass fittings.
All fittings in the 16-32mm diameter range have a new, unique "LBP" design with several innovative solutions increasing the comfort and safety of assembly and guaranteeing the correctness of the connections.
(Leak Before Press), with this function, unpressed connections already start leaking during filling the installation with water (no need to generate pressure) – in accordance with the guidelines of the DVGW. This allows for quick and easy location of unpressed joints, even in very difficult construction conditions.
The special design of the steel sleeve prevents the improper alignment of the jaws on the fitting during the assembly process.
The "TH" jaw covers the plastic sleeve, the "U" is fixed between the plastic sleeve and the flange of the steel sleeve. This design solution eliminates assembly errors resulting from incorrect positioning of pressing jaws.
The end of the fitting stub is designed in the form of a cone, which allows for automatic calibration of a deformed pipe end while inserting it into the fitting. In addition, the fitting body has deepened channels, to which sealing O‑rings are attached. Therefore, seals are additionally protected against damage (cutting the seal) and shifting while inserting the pipe into the fitting.
Due to this construction of the fitting, there is no need for calibration and internal chamfering of the pipe, provided it has been properly cut (perpendicular cut with the use of sharp cutting tools).
белорусский
bosanski
български
hrvatski
český
eesti
suomalainen
français
deutsch
magyar
latvijas
lietuvių
polski
românesc
русский
srpski
slovaški
slovenski
svenska
українська
norsk
ελληνικά
中文
english (India)
english (AE)
