The assembly method of System KAN‑therm Steel Sprinkler uses the simple, fast and, most importantly, safe "Press" technology with pressing the fitting on the pipe. There is no fire hazard during installation work resulting from the use of any type of burner.
See how easy it is!
There are just a few easy steps to make a correct and tight joint:
Cut the pipe to the required length
To cut the pipes use special roll cutters and make the cut perpendicular to the pipe axis.
Prepare a section of the cut pipe
Bevelling the external and internal surface of the pipe end using special bevelling machines or steel files.
Mark the required depth of inserting the pipe into the fitting
It is necessary to achieve the correct strength of the joint.