белорусский
bosanski
български
hrvatski
český
eesti
suomalainen
français
deutsch
magyar
latvijas
lietuvių
polski
românesc
русский
srpski
slovaški
slovenski
svenska
українська
norsk
ελληνικά
中文
english (India)
english (AE)
Application
SYSTEM KAN-therm
Football
Pipes
For surface heating and cooling installations, KAN provides a wide range of pipes, both as far as diameters and types are concerned. This makes it possible to select a technically and economically optimal solution, at the same time meeting all customer requirements.
To make outdoor surface heating and cooling instillations two main KAN‑therm pipes are recommended - PEXC and PERT pipes with EVOH layer and blueFLOOR PERT pipes.
KAN‑therm bluePERT are high-grade pipes with EVOH layer designed for making surface heating and cooling installations (application class 4 according to ISO 10508).
The pipes are made in the five-layer (5L) technology, where all layers are permanently combined in the production process.
Thanks to the use of PE-RT polyethylene (type I) with high thermal resistance and the high flexibility of the product, KAN‑therm bluePERT pipes are comfortable to install even at low temperatures.
The EVOH layer guarantees tightness against oxygen ingress into the system, protecting its components against corrosion.
The EVOH layer (ethyl vinyl alcohol) meets the requirements of DIN 4726.
The pipes are made in line with PN‑EN ISO 21003.
The diameter and length of a pipe coil is determined on the basis of calculations and the design of the whole installation.
They are normally offered in coils of 200 or 100 and even 600mb.
For the purpose of large area heating projects, the length of the coil can be prepared individually.
Universal PEXC, PERT (type II) pipes with EVOH layer, available in the offer of system KAN‑therm, can also be used to make surface heating and cooling installations. PEXC and PERT pipes are also made in the five-layer construction (5L) and available in the diameter range of 12 to 25mm.
The five-layer (5L) construction of the bluePERT, PEXC and PERT pipes secures the EVOH layer against damage during the assembly works.
Assembly of heating loops made of KAN-therm pipes supplied in coils is much easier with the use of a special pipe decoiler.
The possibility of adjusting the decoiler makes it possible to work also with long pipe coils, so that work is faster and more comfortable.
- Copyright © 2020-2022 KAN Group
- All Rights Reserved.