KAN-therm: Pipes



Pipes

Pipes (thin-walled, seamed pipes) are made of an low-carbon steel (RST 34-2) – pipe material 1.0034 to PN-EN 10305-3. Pipes are electroplated (Fe/Zn 88) and receive an 8-15 μm thick zinc coating. Additionally the zinc coating is covered with a passivating chrome coating.  As the pipes are hot galvanised the zinc coating adheres very well to the pipe wall also during bending a pipe. For transport and storage pipes are additionally protected with hot applied oil.

 

Dimensions, specific weights, water volume of KAN-therm Steel tubes:

KAN-therm Steel pipes 

DN

Outside dia. x
wall thickness  
Wall
thickness  
ID   Specific
weights  
Straight section
length 
Water
volume  
  mm x mm mm mm kg/m m l/m
10 12 x 12 1,2 9,6 0,350 6 0,072
12 15 × 1,2  1,2 12,6 0,409 6 0,125
15 18 × 1,2  1,2 15,6 0,498 6 0,192
20 22 × 1,5  1,5 19,0 0,759  6 0,284 
25 28 × 1,5  1,5 25,0 0,982 6 0,491 
32 35 × 1,5  1,5 32,0 1,241  6 0,804
40 42 × 1,5  1,5  39,0 1,500 6 1,194
50 54 × 1,5 1,5 51,0 1,945 6 2,042
60 66,7 × 1,5  1,5 63,7 2,41 6 3,187
65 76,1 × 2,0 2,0 72,1 3,659 6 4,080
80 88,9 × 2,0 2,0 84,9 4,292 6 5,660
100 108 × 2,0 2,0 104,0 5,235 6 8,490