Connecting the elements of System KAN-therm Push Platinum uses a quick, and most importantly, safe (no work with open fire) technology of sliding sleeve (Push). Tight connections without O-rings are made by sliding a brass or plastic sleeve on the connector and the pipe with a manual, hydraulic or battery-powered press tool. The connections do not require any additional sealing, such as Teflon tape or tow.
1.
Cut a multilayer PE‑Xc/Al/PE‑HD Platinum pipe to a required length with a cutter. The cut should be perpendicular to the pipe axis.
Insert the sleeve on the pipe. Match
the sleeve to the pipe diameter.
Plastic sleeves are
symmetrical and do not have to be
positioned on the pipe.
Expand the pipe with
a manual or
battery-powered expander.
Slide the connector into the pipe to the last protrusion on the fitting.
Slide the sleeve with a manual, hydraulic pedal-operated or battery-powered press tool. The fittings may be caught only by their flanges. Do not slide two sleeves at the same time.
When sliding the sleeve on the fitting, monitor the assembly process - after the sleeve is against the fitting flange, stop the sliding process. The connection is ready for the pressure testing.
Clickmeeting
Freshmail
YouTube Video
GrafiteCMS
erecruiter
Facebook Pixel
Facebook Social Plugins
Google Tag Manager
Google Ads
Google Ads Conversion Tracking
SmartLook
AddThis
Yandex Metrica
Google Maps
Google Analytics
The provision of personal data is voluntary, although necessary for the proper operation of your account and all the functionalities associated with it. Information about the user’s rights, including the right to access the content of data, rectification, erasure, restriction of processing, data portability, object, withdraw consent at any time without affecting the lawfulness of the processing and to lodge a complaint with the supervisory authority for data protection is further specified in:
Privacy policy Rules of electronic services provision