We are pleased to announce updates to the KAN SET programme due to changes in our product range. Detailed information is below:
1. New KAN-therm InoxFlow RVV series manifold with 100 mm nipple spacing
KAN-therm InoxFlow RVV series manifolds are used in domestic water or central heating installations. The use of a 100 mm connection spacing results in increased working space between the individual outlets, which enables the problem-free installation of, for example, measurement fixtures.
Details can be found in the specifications/manual.
2. Mounting rail for pipes with the diameter 16-20
The KAN-therm Rail system is designed for surface heating and cooling installations. It consists of plastic rails that allow the installation of heating loop pipes on the floor, wall, ceiling and even external surfaces.
A new product in the KAN SET catalogue - a modular rail with dimensions 27.5 mm × 2 m (4 × 0.5 m). The rail is used for fixing heating circuit pipes with a diameter of 16-20 mm with a minimum spacing of 5 cm.
Details on the KAN-therm Rail system can be found in the Surface Heating and Cooling Guidebook.
3.Removed products
The following products have been removed from the range:
a. PPR stabiAL SDR6 PN20 pipe
b. Terminal block Smart 24 V with LAN and transformer
4. Updated bluePERT pipe catalogue codes
For all types of KAN-therm bluePERT pipes, changes have been made to the way they are identified by catalogue codes. The updated codes can be found in our product catalogue.
We invite you to browse through our Catalogue to see the full range and details of the changes to the range.
If you have any questions or require technical advice, please do not hesitate to contact us.
KAN SET - Innovation for your convenience!